Thank you for purchasing a BELLO & PRECISO watch

 

Your warranty can be managed by registering your watch online at www.belloepreciso.com and you will be assisted directly by the parent company.

 

 

Your watch is guaranteed for 24 months from the date of purchase against any manufacturing defect.

Only the parts which are defective as a result of a manufacturing defect,as determined by our Authorized Service will be repaired or replaced free of charge.

 

 

 

THE FOLLOWING ARE SPECIFICALLY EXCLUDED FROM THE WARRANTY:

 

1. Loss of water resistance after 24 months from the date of purchase

2. Battery,strap and breakage of the crystal glass

3. Damage resulting from:

-Accidental impacts

-Inappropriate use

-Unauthorized repairs or manipulations

- Any consequence due to the normal wear of aging

 

In order to honor the warranty you will be required to present the warranty to an authorized dealer. The warranty must be fully completed and validated by a licensed dealer.

 

In order to obtain a warranty service you will be required to present the warranty to an authorized dealer. The warranty must be fully completed and validated by a licensed dealer.

 

 

INSTRUCTIONS

 

TEMPO:

 

1.Pull the crown to the first click

2.Adjust the date stopping a day before the current date

3.Pull the crown to the second click and slide 24 hours until you reach the date of the current day

4.Adjust the current time

 

An inaccuracy of +/- 10 seconds per day is considered normal

 

CHRONOS:

 

1.SET DATE AND TIME: Pull the crown to the first click and turn counterclockwise to set the date.

In order to set the time you have to pull out the crown to the second click and set current time.

2. CHRONOGRAPH FUNCTIONING: The button above the crown starts and stops the chronograph.The button below the crown resets the chronograph

3. CHRONOGRAPH RESET: Pull the crown out to the second click.Press the button above the crown to set second hand to zero position.Once the hand reaches the zero position push back in the crown.